18 Nov 09 Cables – Figuring Out Your Home Theater System Installation
They are thrilled that the new HDTV and Hi-definition DVD players have. For many, the excitement of the purchase is blacked out when they come home and see the colorful variety of cables and connectors, knowing that they must be properly connected to your home theater system will function properly. No doubt connecting your home theater system can be a challenge, especially if you do not know what kind of cable that will give you the best quality.
Almost allfound the new HD TVs on the market today have several ports on the back of each unit. These are some of the links that you might see on the back of your new HDTV.
Analog coaxial RF connector: This is a "legacy" link found on all older TVs. It is the poorest quality TV connection. This is a compound containing both an audio and video signals transported in a purely analog format.
Composite video: This is the yellow jack, which is located on the back of the TV, and it isAnalog video-only. This single cable, both chrominance and luminance portions of a video signal and can share up to 480 interlaced lines of resolution.
S-Video: This is a small 4-pin connector, located on the back of your TV. It is an update in terms of image quality on the TV, because S-Video is the chrominance and luminance portions of a video signal, which increases the quality of the video image. S-Video is a connection, which sends an analog signal withResolution of up to 480 interlaced lines of resolution.
Component video: The red, green and blue RCA connectors on the back of your TV to make this connection. The signal for this non-audio, and it is only an analog signal. The luminance and 2 colors in this context, component video, which separated into real high-definition picture quality. Component video connections allow to pass Resolution 1080 lines progressive (1080p/FullHD).
DVI: Digital VideoInterface has a true digital video connection, but no sound. This type of connection was the Hi-Def standard until recently, and offers up to 1080 progressive lines of resolution.
High Definition Multimedia Interface (HDMI): This connection allows a solo connect your auxiliary equipment and HDTV. There is a fully digital audio and video connection. Almost all new HDTV provides this connection.
To help you get the most from your new HDTV, the followingScenarios.
1) In this scenario, you want to hook up a brand new HDTV with a new Blu-Ray DVD player. A single HDMI cable is all that is needed to connect these devices. This will maximize the quality of sound and video, between the Blu-ray and HDTV. Moreover, this is the only cable required to connect these two components without power connectors.
2) In this example, you want a brand new HDTV, a new Blu-ray DVD player contact, and a full surround-sound system. The best way toconnect these three devices, provided the Surround A/V Receiver has HDMI input/output capability, is to use a short HDMI cable from the Blu-ray to the A/V Receiver and run a longer HDMI cable from the A/V Receiver’s output to the HDTV. This allows the receiver to switch the HDMI connections and is especially useful if your new HDTV only has one HDMI jack and you have multiple pieces of equipment with HDMI jacks that you want to connect. It will also make it possible for the A/V Receiver to use the digital audio track from the Blu-ray player to give mind-blowing surround sound when playing from your new Blu-ray DVDs.
3) In this case, you want a DVD player with an older HDTV get in touch and a surround sound system. When you go through the connection of these elements is the first thing that has to do to check what type of video connection DVD player and HDTV. Scenario 2 Check if your an HDTV DVI or HDMI connection and DVD player has either has connections. If the best HDTVPort is a DVI port and a DVD player has HDMI, a simple adapter cable can help provide the digital video signal to the HDTV. The digital part of your audio signal from the DVD player is on your A / V receiver, you need a coaxial digital (the orange jack on your A / V receiver) or an optical Toslink the small square (jack that states "optical on the A / V Reciver).
If you are one of the set-ups that have been discussed here apply, you have a perfect connection,that all your work Hi-definition devices. But there are many different ways to configure the devices listed on here. If none of the cases mentioned above fits your situation, read the manufacturer's operating instructions supplied with the device.
Tags: Cables, Figuring, Installation, system, theater
